Long lasting Asphalt Resurfacing

asphalt resurfacing

Asphalt floors are meant to last for a minimum of 8 years and under ideal conditions they can last for up to 12 or 15 years. There are very crucial steps that need to be taken to ensure that your driveways and walkways are in perfect condition. Asphalt is a very durable surface material and are very cost effective options compared to other types of surface coating. After some years, there may be a need for asphalt resurfacing. Here are some quick steps your paving contractor will take to even out cracked or weak spots.

Lowering utilities: The first thing your paving contractor will do will be to lower the utilities on the surface or remove any component of the surface that may be damaged during the process of resurfacing your driveway with asphalt and other binding agents.

Clearing: After lowering utilities, the road is cleared of debris and any other impediment that may inhibit the free flow of work. This is very vital for very busy driveways with substantial vehicular traffic. To avoid accidents and traffic gridlock, signs need to be strategically placed at key points to direct traffic.

Asphalt Resurfacing

Surface Milling: A milling machine is then used to remove the old pavement so that asphalt resurfacing can be done again. It is bad practice and an act of unprofessionalism to lay new asphalt without removing the old one. Failure to do this will lead to varying degrees of structural defects such as underground cracks, uneven surfaces and so on.

Brand New Resurfacing: At this point, utilities are raised back to original heights so brand new asphalt can be laid over the entire surface area. This can only be perfectly done by experts which is why you need to hire very qualified paving contractors who know the job.

Finishing touches: To complete the job, your paving contractor will put finishing touches to the work area such as pavement stripping installation. After this is done, time is needed for the surface to dry out which takes only a few hours under normal temperatures. Once the area is dry, your driveway is ready for use.

Hiring a very good asphalt paving contractor is very important if you want your driveway to remain in good condition for a long time. If you don’t want to spend so much every few years on asphalt resurfacing, you will have to maintain your driveway regularly immediately cracks are spotted. A contractor can be called upon to examine the condition and proffer solutions. Good contractors can be contacted near you for a professional service you can trust. Before work commences, make sure you demand for a work estimate and a work completion deadline.

admin

Read Previous

Leaking Pipes – Where to Find a Good Plumber?

Read Next

Storm Clearing and Stump Removal Services in Austin, Texas

Leave a Reply

Your email address will not be published. Required fields are marked *